Mould Prevention and Ventilation Perth

Mould prevention starts with the moisture behind returning patches, including ventilation and exhaust fan use in your Perth home.

Then we explain changes that suit the home and what separate repairs may be needed.

Cleaning is only one part of the job.

Keeping damp from bringing mould back

Perth has a hot, dry summer and a cool, wet winter.

Mould tends to show up through the wet months when homes are kept shut.

Coastal homes from Scarborough to Fremantle get damp sea air.

Inland and hills homes feel cold winter nights too.

Tell us about foggy windows and bathrooms without exhaust fans so we can talk through ventilation in your home.

Everyday moisture can build up

Showering and cooking without exhaust fans or open windows can add moisture.

Clothes dryers without ventilation and unflued gas heaters are other common causes listed by the WA Department of Health.

What we check with you

Our scope is checking and explaining moisture sources and practical prevention.

Exhaust fan installation, electrical work and building repairs are not included unless separately agreed.

  • How bathrooms and cooking spaces are ventilated
  • How exhaust fans are used
  • Whether a clothes dryer has ventilation
  • Signs of plumbing, roof or wall leaks, or rising damp

Why cleaning alone can fall short

Start with the moisture

Mould needs moisture.

Removing the visible patch without finding the moisture source leaves the cause unresolved.

Poor ventilation, condensation and leaks are all things to check.

We explain what we find in plain words.

The moisture and cleaning advice on this page comes from the WA Department of Health.

What affects the cost

You get a fixed written price before treatment.

We separate mould removal from any repairs or replacement that may be needed.

  • How much of the surface is affected
  • Whether the mould is on a hard surface or in material
  • How many rooms need treatment
  • What we can reach and whether mould may be hidden
  • The moisture source and any drying or separate repairs needed

Four easy steps

  1. About 2 minutes to tell us where the mould is.

  2. We get back to you within 30 minutes.

  3. A clear written price and a time that suits you.

  4. We get the agreed mould work done.

Not sure where to start?

Send photos for a free mould check.

We tell you whether it looks like a quick clean or a bigger job, and where the moisture is likely coming from.

For the main service, read about mould removal Perth.

Questions people ask

Why does mould show up in Perth's wet months?

Perth has a hot, dry summer and a cool, wet winter.

About 80% of the region's rain falls between May and October, according to the Bureau of Meteorology.

Mould tends to show up through those wet months when homes are shut up and windows fog with condensation.

Bathrooms without exhaust fans and double-brick homes are common trouble spots.

Finding the moisture source still matters.

Is mould just a coastal problem?

No.

Coastal suburbs from Scarborough to Fremantle get damp sea air, but inland and hills homes feel the cold winter nights too.

In Midland or Kalamunda, a shut-up home with foggy windows can be part of the winter picture as well.

We start with the moisture source in your home, not just the suburb.

Why does it keep coming back?

Mould needs moisture.

Poor ventilation, condensation or an unresolved leak can leave that moisture in place after a clean.

Finding and fixing the moisture source is the step that stops it coming back.

Can you fix the cause?

We look for the moisture source and explain the changes within our treatment scope.

That may include everyday ventilation and exhaust fan use.

If the cause is a roof, wall or plumbing leak, that repair needs to be dealt with separately.

We do not hide that in a treatment quote.

Can I just use bleach?

Start with the moisture source, not a stronger cleaner.

WA Department of Health advice is that small hard-surface patches can be scrubbed with soapy water.

Wear gloves, a mask and goggles, and scrub up to 50 cm past the visible edge.

Get help if it is large or keeps returning.

Do you need to test it?

Testing is not needed to treat mould as a health risk, according to the WA Department of Health.

We start with where the mould is, how far it reaches and where the moisture may be coming from.

Will I know the price before you start?

Yes.

We give you a fixed written price before treatment.

The free check helps us work out whether photos are enough or we need to look at the space first.

Tell us about all the affected rooms so the quote covers the job.

How fast can you come out?

We will be in touch within 30 minutes of your enquiry to discuss the next step.

We confirm the available visit times with you.

The reply time is not an arrival time.

Get a fast quote

Tell us where the mould is and what's going on. We'll be in touch within 30 minutes with the next step.

Fields with * are needed. See our privacy policy.